About Ramset | P.A.T. Licensing | Contact Us
 

HOMETechnical DataApplications GuideProductsNews & Promotions Literature
or go to the Advance Search

Gas Tool Fasteners
The fasteners are designed for use in Ramset Single Shot Gas Tools (R150, T3SS)
THREADED ROD HANGER For suspended ceilings, piping and other items using 1/4 or 3/8 threaded rod
FASTENER IS PREASSEMBLED TO AN 16 GAGE THREADED ROD HANGER. 100 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
14TRHMP034
1/4" Rod hanger with 3/4" plated pin
|
38TRHMP034
3/8" Rod hanger with 3/4" plated pin
  Shank diameter = .104/.125 Head diameter = .300
           

ONE HOLE CONDUIT STRAP Used to attach conduit or armored cable to concrete
FASTENER IS PREASSEMBLED TO A 15 GAGE CONDUIT STRAP. 100 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
38HSMP034*
3/8" Hole strap with 3/4" plated pin
|
12HSMP034
1/2" Hole strap with 3/4" plated pin
| 34HSMP034 3/4" Hole strap with 3/4" plated pin  
| 10HSMP034 1" Hole strap with 3/4" plated pin  
| 114HSMP034 ** 1" Hole strap with 3/4" plated pin  
  Shank diameter = .104/.125 Head diameter = .300  
  * 38HSMP034 = 18 gage
** 114HSMP034 = 13 gage 		 

CONDUIT CLAMP Used to attach conduit to concrete
PIN PREASSEMBLED TO AN 18 GAGE CONDUIT CLAMP. 50 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
12CCMP034L
1/2" Conduit clamp with 3/4" plated pin
|
34CCMP034L
3/4" Conduit clamp with 3/4" plated pin
  Shank diameter = .104/.125 Head diameter = .300        
           

CEILING CLIP ASSEMBLY Preassembled Ceiling Clip
PLATED 14 GAGE CLIP. 100 PER BOX.
clamp  
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
34CLIP
3/4
square square square
             
  Shank diameter = .104/.125 Head diameter = .300        
           


TIE STRAP HOLDER Used to install temporary lighting and secure low voltage cable to concrete, uses a standard cable tie up to 3/8" in width
FASTENER PREASSEMBLED TO AN 22 GAGE TIE STRAP HOLDER. 100 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
TSHMP034
Tie strap holder with 3/4" plated pin
 
Shank diameter = .104/.125 Head diameter = .300
  
             
           

MECHANICAL PIN
WITH WASHER		 Used for the attachment of light gage metal to concrete and steel such as HVAC duct strap to concrete
PLATED PIN PREASSEMBLED TO A 1/2" DOMED WASHER. 500 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150* T3SS*
|
M012
1/2" Plated step pin with domed washer
 
|
M034
3/4" Plated pin with domed washer
 
| M034BB 3/4" Premium step pin with domed washer  
| M100 1" Plated pin with domed washer  
  Shank diameter = .125 Step Pin .104/.118
Head diameter = .300 (M012=.250)		  
  *Will fit R150 & T3SS with optional work contact element P/N M150200  

1/4-20 THREADED
STUD 		Used to attach electrical components to concrete where removability of the component is required
PLATED PIN WITH TOP HAT. 500 PER BOX.
 
PART
NUMBER
THREAD
LENGTH
SHANK
LENGTH 		M150 E150/
T150		 R150 T3SS
|
14STUD
1/2"
3/4"
  
 
  Shank diameter = .125

TOP HAT PIN Used for general purpose fastening to concrete
PLATED PIN WITH TOP HAT. 100 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
MP034TH
3/4" Plated pin with top hat
 
Shank diameter = .125 Head diameter = .300
             

BRIDLE RING Pre-Assembled 2" Bridle Ring supports low voltage, data com, signal, and control cables
50 PER BOX.
 
PART
NUMBER
DESCRIPTION
 M150 E150/
T150		 R150 T3SS
|
BR2
2" bridle ring
 
Shank diameter = .125